Can You Switch from City Water to well Water?

For years, many homeowners in the US have relied on city water as their primary source of clean drinking water. In recent years, there has been a significant increase in contaminants found within the tap water from cities across the country.

With this knowledge, homeowners may be looking for an alternative source for their water quality. This article explores the benefits and drawbacks of switching from city water to well water.

What’s the difference between city water and well water?

There are many cases where people want to switch from city water to well water. Whether the person’s water source is their own private well water filtration or if they are considering switching to a private company that provides it, there are many factors that must be considered before making the switch.

First, you should learn more about your current water supply and whether it is safe for drinking, cooking, and bathing. If you have been using municipal water since birth, then chances are good that it meets all standards set by the Environmental Protection Agency. However, if you were born in another state or country,

City water :

Can You Switch from City Water to well Water

is one of the most common sources that people use. It is highly regulated and it comes from many different sources. Treatment plants ensure that the water is safe to drink, which can be done by adding chlorine or other chemicals to it.

Some treatment plants will use ultraviolet radiation to kill any microorganisms. Also, The Water quality depends on its source.

Pros :

– City water is usually treated with chemicals that kill bacteria and viruses. This makes it safe to drink.

– often tested regularly and has been shown to have low levels of contaminants.

– can be used for irrigation without any additional treatment.

– Does not require much maintenance.


– City water may contain high amounts of chlorine, which can cause skin irritation.

– may have higher levels of minerals than well water.

– City water cannot be used for hydroponic gardening.

Well Water :

Can You Switch from City Water to well Water

Do you avoid drinking well water because you’re afraid that it will make you sick? You may want to reconsider. There are a number of reasons why switching from city water to well water can be a great idea.

Pros :

-No fluoride or other chemicals were added by the municipality. This means there is no risk of getting an illness like fluorosis. Fluoride has also been linked with cancer and bone disease in children. Since it is not fluoridated, better for your teeth!

-Better for the environment: drinking water from well doesn’t require treatment, so less energy goes into treating your tap water. It’s also better for the earth since it uses up fewer resources.

-No chlorine: Chlorine kills off bacteria and viruses which makes drinking chlorinated not safe water. If you have a problem with stomach issues, this could cause problems.

-No copper pipes corroding: Copper can be toxic to humans if ingested over time. The city used lead instead of copper because they thought that would make them more resistant to corrosion.

Cons :

-Lack of filtration: This is one of the biggest cons in my opinion. There are no filters on any faucets or sinks so there will always be some level of contamination going into your tap water.

-Costly piping: It’s expensive to install a new system like this. You have to dig trenches for all the pipes which means you need permits and lots of money. Also, most people don’t want their house to look like an old building with exposed plumbing.

-It is affected by the geography it comes from: If you live somewhere where the ground has been contaminated then that could affect how much lead gets filtered out of the water. For example, if you live near a riverbed then you might get more contaminants than someone who lives further away from rivers.

-Difficulty finding a wells water specialist: This can be difficult because there are so many different types of wells. Some will filter better than others but they’re not always easy to find.

How much does it cost to switch from city water to well water?

In the past, people often drank from a well for their water. While water filter system can be used to clean city water, they cannot remove heavy metals from the water supply.

For example, if you reside in Flint, Michigan, or another area with a risk of lead exposure in your water supply, you might want to switch to wells water.

However, this is only possible if you have access to private wells and know what type you need. If you don’t live near existing wells, then you’ll likely pay more money to install a filtration system yourself.

Cost of water testing: $50-$100 per test depending on how many tests are needed. This includes the initial soil sample as well as any additional samples that may be required after installation. The lab will also charge around $10-20/gallons for each sample collected.

Cost of well drilling: Depending on where you live, it can cost anywhere from $1k – $5k+ dollars to drill a new well. You should expect to spend at least half of that amount just getting permits and other fees associated with building a well.

Cost of buying a pump: If your water source is not already pumping out enough, this could easily add another $500 or so to the total costs.

Cost of setting up water tanks: This depends entirely on how much space you have available in which to store all of these gallons of water.

It’s best if you plan ahead and buy an adequate number of storage containers before starting construction.

How much well water can be pumped per hour?

The amount that can be pumped per hour varies depending on the well’s depth and the pump’s horsepower.

A larger surface area will allow for more water to be pumped in a smaller area, and higher water pressure will allow for more to be pumped in one hour than a lower pressure.

The level of water that can be pumped per hour is based on the availability and capacity of the specific well system. Pumps can typically pump anywhere from 1,000 to 10,000 gallons per hour.

These numbers also depend on what type of pumping system is being used, such as a jet or centrifugal pump.

Which is more Economical?

city water is more economical than well water. The maintenance cost, initial cost, and upkeep of city water are less than that of well water.

However, if you’re not on city water but live in an area near a well with good quality water, then switch to it.

In conclusion, well water quality is the best option for health. It provides you with more minerals and vitamins, making it more beneficial to your body.

Leave a Comment